Having a long term experince in providing professional cleaning services, our Company is glad to share few little sercrets for the perfect cleaning with our current and potential cutomers. One of the biggest nightmares for every house wife are the wax stains.
The candles in our homes bring cosiness and irreplacable atmsphere, however they can easily be a treat and some unwanted wax drops to fall on the surfaces in our homes. Removing wax from furniture, wooden surfaces or carpets might be a hard, but not an impossible task.

In order to remove wax drop form a carpet or some upholstered furniture, all you would need is a sheet of paper and an iron.
1. You must put the paper on the stain, in order to cover the whole stained area.
2. If you are using a piece of paper that has some writings on it, put it in such a way, so that the ink would not be in a contact with the fabrics.
3. Put the iron on a middle heat and turn it on to warm up.
4. Once the iron has reached the needed temperature, you should start ironing the stain trough the paper (avoiding straight contact between the wax and the iron plate. Once the wax is heated, it will melt and will get absorbed by the paper.
5. When a dark spot start to be seen on the paper, you must replace it with a clean one and repeat the process.
6. In a while the stains will disapear and the whole wax will be removed.

If the wax is on a wooden surface, the easiest way to remove it is to put on it a sack full of ice and leave it there untill the wax becomes crumbly. Then you can just pill it off the surface.
The marble and granit and extremly fastidious, when it comes to cleaning. This is why only natural detergents must be used and once the surfaces are clean, they must be also polished. There are also special restoring detergents, suitable for scratched or darkened stone surfaces. You would need to clean the stone with an apropriate spray and soft cloth. Always use liquid detergents and never powderish abrasive once, the usage of abrasive sponges or brushed is also forbidden. A small trick you can use when there are some scratess on the marbel is to apply some car polish spray or sylicon based srpay, that will fill in the rifts and will restore the marbels shine.